CECAROL 32 inch Propane Fire Table with Lid, Auto-Ignition 50000 BTU with External Igniter

Do you miss the childhood with your friends around a bonfire ?

Do you want to embellish the patio or courtyard with an actual game changer?

Do you need a leisure time in which you can have fun with your family and friends?

Cecarol fire pit table, with heavy-duty material, exclusive design and concise assembly, prepares to be the solution of all the above questions. 

User-friendly

The tabletop and the fire pit is one-piece stamped, which makes it more well-knit.

Gaps at the bottom of the door accelerate air circulation

The door magnet on a leg increases the convenience when closing the door.

Warm tips:

Only for outdoor use.

The fire is not suitable for BBQ.

Product Specifications:

Package dimension: 34.25"x34.25"x9.45"

Package weight: 62.6lbs

Cover lid: 15"x15"x0.9"

Gas pipe length: 19.7"

Cylinder joint diameter: 30mm/1.18"

Lava stone: 4.4lbs

Ignition Steps:

Turn the LP cylinder gas valve slowly to fully open position, then press the external control knob and turn it slightly to the “on” direction, remember not to turn on the igniter at one blow. Hold it for 5 seconds so that the fuel gas will get to the ring burner and come out from the air holes on it, don't loose your hand.

Start to turn the knob to the "on" position, you’ll hear a series of clicking noise, that’s because the ignition needle in the burner head is emitting the electric spark to the air hole, the combination of electric spark and LP-gas will bring the fire.

If you are trying to light the burner for the first time, please be patient to wait for 3-5 seconds after turning the knob as it requires time for the gas pipe to vent the air in it.

If you get stuck with the ignition process, please check the product as follows:

1. Check whether the electrode wire is fully inserted into the valve hole of the safety valve, if not, the electric spark wouldn’t be successfully transferred.

2. Dismount the ignition cover and check whether the ignition needle is pointed to the air hole, if not, the electric spark wouldn’t light the fuel gas.

3. Check whether the ignition needle is around 4mm away from the air hole, the distance shouldn’t be too far or too near.

Check whether the LP-gas in the cylinder is almost running out, if so, the gas pressure will decrease so that it couldn’t deliver enough gas to the burner. So check your gas cylinder regularly.