62cc Gas Chainsaw 20" Bar Gasoline Powered Chain Saw 2 Cycle Engine Cutting Saw Kit 4000W

2Stroke Gasoline Chainsaw 20" Bar Powered Engine Wood Cutting Gas Chain Saw 62CC

Product function description:

NOTE:
Installation Manual Is NOT Included
Professional Installation Is Highly Recommended

Description:
This chain saw is sharp to cut the twigs, branches, bushes, shrubs and trees. The saw is waterproof and rustproof, easy to clean with water. With exceptional hardness and durability, it is good for sawing, cutting, pruning and trimming wood, perfect tool for gardening, wordworking, landscaping.

Features:
Color: black+red
Material: metal.
Bar Length:20 in
Pitch: 0.325''
Sprocket: 7T*0.325''
Chain width: 0.058''
Power: 4000W
Gas Displacement: 62CC(cm3)
Rotating Speed:12500(rpm)
Fuel capacity: 550(ML)
Oil capacity: 260(ML)
Voltage:12 V


NOTE
Structure chart:

Guide chain installation step diagram:

Step 1: Install the guide plate
Step 2: Install the chain
Step 3: Align the holes to install the side cover and screw on the nut
Step 4: Adjust the tightness of the chain
Step 5: Sleeve lock nut
Fuel injection volume can be adjusted

Step 1:
Add engine oil. The function of engine oil is to lubricate the chain, so you must wait for the oil to spray out before you can go to the tree.
Step 2:
Add gasoline. The ratio of gasoline to oil is 25:1 or 20:1, 20:1 is recommended (must be two-stroke oil, and Mobil two-stroke oil is recommended). Do not use four-stroke engine oil or other engine oil, otherwise it will easily cause cylinder pulling or other problems

1. Pull up the flame out switch
2. Pull out the damper
3. Pull the start handle
Pull the start handle 3-6 times. When you hear the machine banging, push the damper back in, otherwise the machine will not start.
4. Close the damper
Turn off the air door, pull the start handle 1-3 times again, you can start normally

Gross weight:6.5kg
Size:58*27*33cm

Package includes:
1 x Hand saw
1 x Funnel
1 x Proportioning pot